SECTION_00 // Service / Safety Training

The academy portal.

Certified safety training delivered on-site at your facility. Every module ends in verifiable certification — turning compliance into a culture your workforce carries home.

Schedule Team Training

NFPA 70E

Electrical Safety Training

Reduce Risk | Protect Your People | Stay Compliant

Comprehensive NFPA 70E training for electrical workers, supervisors, and operations personnel. Equip your team with the knowledge and skills to work safely around electrical hazards.

Electrical Hazard Awareness
Risk Assessment
PPE Selection & Use
Safe Work Practices
NFPA 70E Compliance

Onsite Training

Tailored to your facility's needs

SECTION_01 // Course Catalog

Modules engineered for retention.

OSHA 10-Hour Outreach

Foundational awareness for workers on common hazards, rights, and employer responsibilities.

Duration10 hrs
LevelEntry
VerticalGeneral / Construction

OSHA 30-Hour Outreach

Deeper hazard recognition and supervisor-level responsibilities for crew leads and managers.

Duration30 hrs
LevelSupervisor
VerticalGeneral / Construction

Fall Protection

29 CFR 1926 Subpart M — systems, anchor points, inspection, and rescue planning.

Duration4 hrs
LevelSpecialized
VerticalConstruction

Confined Space Entry

Permit-required spaces, atmospheric testing, attendants, and entry procedures.

Duration6 hrs
LevelSpecialized
VerticalGeneral Industry

Hazard Communication

HazCom 2012 / GHS — SDS interpretation, labeling, and chemical safety programs.

Duration3 hrs
LevelEntry
VerticalAll Industries

Lockout / Tagout

Control of hazardous energy (1910.147) — procedures, training, and periodic inspection.

Duration4 hrs
LevelSpecialized
VerticalGeneral Industry

NFPA 70E Electrical Safety

NFPA 70E — arc flash and shock hazard analysis, energized work permits, and PPE category selection.

Duration8 hrs
LevelSpecialized
VerticalAll Industries

ATSSA Flagger Training

ATSSA-certified flagger training — work zone setup, signaling, and temporary traffic control per the MUTCD.

Duration4 hrs
LevelEntry
VerticalConstruction / Roadway

First-Aid / CPR / AED

Adult CPR, AED operation, and basic first-aid response — choking, bleeding control, and sudden illness emergencies.

Duration4-6 hrs
LevelEntry
VerticalAll Industries

Stop the Bleed

Life-threatening bleeding control — tourniquet application, wound packing, and the ABCs of bleeding per the national Stop the Bleed campaign.

Duration2 hrs
LevelEntry
VerticalAll Industries
SECTION_1.5 // Featured Course

NFPA 70E

ELECTRICAL SAFETY TRAINING

Reduce Risk · Protect Your People · Stay Compliant

NFPA 70E 2027 now requires training to be in person.

The 2027 edition of NFPA 70E requires electrical safety training to be conducted in person. Don't wait — make sure your team is prepared and compliant.

Request 70E Training
Worker in arc flash protective gear servicing an electrical panel
Electrical Hazard Awareness
Risk Assessment
PPE Selection & Use
Safe Work Practices
NFPA 70E Compliance

Onsite, in-person training tailored to your facility's needs.

Experienced InstructorsReal-World ApplicationSafer EmployeesCompliance Ready
SECTION_1.5 // Featured Course

First-Aid · CPR · AED

EMERGENCY RESPONSE TRAINING

Save a Life · Stabilize the Scene · Build Confidence

Hands-on, in-person training that prepares your crew to act.

Every second counts in a cardiac or injury emergency. Our on-site First-Aid, CPR, and AED course gives your team real-world practice on training manikins and AED units so they can respond calmly and correctly when it matters most.

Request First-Aid / CPR / AED Training
Instructor demonstrating CPR on a training manikin with an AED unit nearby
Adult CPR
AED Operation
First-Aid Response
Choking & Bleeding
Emergency Readiness

Onsite, in-person training tailored to your facility's needs.

Hands-On PracticeCertified InstructorsOn-Site DeliveryCompliance Ready
SECTION_1.5 // Featured Course

Stop the Bleed

BLEEDING CONTROL TRAINING

Act Fast · Pack the Wound · Apply Pressure

A person can bleed to death in under five minutes.

Bystanders are often first on scene. Our on-site Stop the Bleed course teaches your crew the ABCs of bleeding control with hands-on tourniquet and wound-packing practice — so they can keep a coworker alive until help arrives.

Request Stop the Bleed Training
Instructor demonstrating wound packing and tourniquet application on a training manikin
Wound Packing
Tourniquet Use
ABCs of Bleeding
Scene Safety
Save a Life

Onsite, in-person training tailored to your facility's needs.

Hands-On PracticeCertified InstructorsOn-Site DeliveryCompliance Ready
SECTION_02 // Delivery Format

On-Site, Instructor-Led

Every course is delivered in person at your facility by a certified instructor, tailored to your site-specific hazards, equipment, and crew. No online modules — just hands-on, practical training where your people actually work.

TRINITY/SAFETY

OSHA compliance audits and certified safety training for construction and general industry. We engineer the invisible infrastructure that protects your people and your operation.

Global Safety Clock07:00:36 PM ET

Contact

  • +1 (309) 481-0801
  • trinitysafety333@gmail.com
  • Serving PA & MD
Cred. ID // OSHA-AUTH-1910-1926 // CERT-OSHA-30© 2026 Trinity Safety, LLC. All rights reserved.
    base44
    Edit with Base44